Installing artificial grass can be a great option for those looking to upgrade their outdoor space. It provides a low-maintenance, eco-friendly alternative to natural grass that looks and feels just like the real thing. Here are some steps to follow when installing artificial grass Dubai:
Clear the area:
First, remove everything from the space. Take out old plants, rocks, and weeds. The ground must be completely bare. Use a shovel or a sod cutter for this job. Dig down to a depth of about three to four inches. This depth allows room for a solid base. Get rid of all organic material. If you leave any roots behind, they might rot and create uneven spots later. A clean slate gives you a strong start.
Fix the base:
The base layer holds everything together. Spread a crushed stone mix across the cleared dirt. This mix is often called “hardcore.” Level it out with a rake. The stone layer should be about two to three inches thick. Compact this layer firmly. A plate compactor works best for this step. Run the machine over the entire area to create a hard, flat surface.
Add the sharp sand:
Next comes a layer of sharp sand. Spread this sand over the compacted stone. The sand layer should be roughly one inch thick. Rake it until it is perfectly smooth. Use a long straight board to screed the sand. Drag the board across the area to find any high or low points. This step creates a final, ultra-smooth surface for your new lawn.
Lay the grass:
Unroll your artificial grass over the prepared sand. Allow the grass to rest for an hour or two. This helps the backing relax and removes any wrinkles from the roll. Position the grass pieces so the blade direction faces the same way. If you have multiple rolls, lay them side by side. Keep the edges tight against each other. Do not stretch the grass too much. Let it lie naturally.
Cut and join the pieces:
Cut the artificial grass to match the shape of your lawn. Use a sharp utility knife for clean edges. For large areas, you will likely have seams. Place the two edges together perfectly. Use seaming tape and glue to join them. Fold back the edges, lay the tape in the middle, and apply adhesive. Press the grass down onto the tape. Weigh the seam down with heavy objects while the glue sets.
